MENU CART {{currentCart.getItemCount()}}
Snapper7 1S Brushless Whoop Racer Drone Mini FPV Quadcopter BNF Basic Version (with Flysky Receiver)

Snapper7 1S Brushless Whoop Racer Drone Mini FPV Quadcopter BNF Basic Version (with Flysky Receiver)

{{ productService.variationPriceMemberTag(variationSelected) }}
{{shoplineProductReview.avg_score}} {{'product.product_review.stars' | translate}} | {{}} {{'' | translate}}
{{amazonProductReview.avg_rating}} {{'product.product_review.stars' | translate}} | {{amazonProductReview.total_comment_count}} {{'' | translate}}
{{ title.name_translations | translateModel }} : {{variationName[$index] | translateModel}}
The maximum quantity per submit is 99999
This quantity is invalid, please enter a valid quantity.
Sold Out

Not enough stock.
Your item was not added to your cart.

Not enough stock.
Please adjust your quantity.

Limit {{ product.max_order_quantity }} per order.

Only {{ quantityOfStock }} item(s) left.

Please message the shop owner for order details.


Happymodel Snapper7 75mm Crazybee F3 OSD 5A BL_S ESC 1S Brushless Whoop FPV Racing Drone BNF

Notice: FrSky LBT EU Firmware D16 Transmitter can not compatible with FrSky version drone. 
                 You can change your transmitter to LBT EU Firmware D8 version or International version.

Specification: ( DSMX/ DSM2 Version Manual )
Brand Name: Happymodel
Model: Snapper7
Item Name: 75mm Wheelbase 1S Brushless Whoop FPV Racing Drone
Wheelbase: 75mm

Version: Basic Version / Standard Version ( Optional)
- The diffirence of them are the package lipo battery and charger

Receiver: Compatible Frsky D8 Receiver  OR 
                Compatible Flysky AFHDS/ AFHDS-2A Receiver ( Optional)

Size: 98.5mm*98.5mm*36mm
Weight: 28g (without battery)

Crazybee F3 Flight Controller
Item Name: Crazybee F3 FC
MCU: STM32F303CCT6 (72MHZ, 256K FLASH)
Sensor: MPU-6000 (SPI connection)
Power supply: 1S battery input (DC 3.5-4.35V)
Built-in 5A(each) Blheli_S 4in1 ESC Dshot600 ready
Built-in Frsky receiver Or Flysky Receiver
Built-in Betaflight OSD(SPI Controll)
Built-in Current meter (Max 14A,could be modified to 28A by replace resistor)
Built-in 5V 0.8A BEC with LC filter
Built-in voltage detection
BLHELI_S pass-through Ready
Firmware:  Betaflight_3.3.0_Crazybee
Board size: 28.5 * 28.5MM
Board weight: 3.5 g
Heading LED Ready
Onboard 5A 4 In 1 ESC  

Power supply: 1S LiPo/LiPo HV (4.2v/4.35v)
Current: 5A continuous peak 6A (3 seconds)
Support BLHeliSuite programmable
Factory firmware: O_L_5_REV16_6.HEX
Motor connector: JST PH1.25 3pin
Signal Support: Dshot150/Dshot300/Dshot600/Oneshot125/Multishot/PWM
Onboard Frsky Receiver Version ( Optional)

SPI BUS receiver
Frsky D8
Compatible both of Non EU and EU LBT transmitter
Channels: 8CH 
Failsafe support
No ground interference  ( Transmitter and receiver 1 m from the ground) : 300m
Onboaed Flysky Receiver Version ( Optional)

SPI BUS receiver
Protocol: AFHDS and AFHDS-2A Switchable
Channels: 8ch (AFHDS) or 14ch (AFHDS-2A)
No ground interference (Transmitter and receiver 1 m from the ground): 300m
Failsafe support
0802 19000KV Motor 

Model: 0802
KV: 19000KV
Configu-ration: 9N12P
Stator Diamter: 7mm
Stator Length: 3mm
Shaft Diameter: Φ1.0
Motor Dimension (Dia.*Len) : Φ10*14.5
Weight: 2.5g
No.of Cells: 1S Lipo
40mm 3-blade Propeller ( 4 CW + 4 CCW)
5.8G VTX AIO Camera 
5.8G 48CH 25mW VTX 
Output Power: 25mW
Frequency: 48CH 
With Raceband: 5474-5945 MHZ
Input Voltage: 3.3V-5.5V
Current Consumption: 300mA (type)

700TVL Camera
Camera Resolution: 700TVL
Field of View: 120°
Video Format: NTSC
Antenna: RG178 antenna
Size: 13.9x12.0mm( LxW)
Weight: 3g
 3.8V 450mAh Lipo Battery

Capacity: 450mAh
Voltage: 3.8V
Continuous Discharge Rate: 30C
Instantaneous Discharge Rate: 60C
Size: 60x18x7mm
Weight: 13.6g
Connector: PH2.0

- Betaflight support, multi flight mode: ACRO/AIR/ANGLE
- Powerful Brushless motor and Smooth ESC 
- CNC aluminum alloy propeller guard 
- Betaflight OSD support, easy to get RSSI, Voltage and other info from your goggles
- Adjust the settings and the PID of the flight controller via OSD
- Frsky version support both EU LBT and NON-EU Frsky transmitter
- Full telemetry function ready
- Head lights ready
- Camera angle adjustable
- Real Bind and Fly version

Package Inlcuded:
Basic Version
1x Snapper7 75mm FPV Drone
4x 40mm 3-Blade Propellers ( 4 CW & 4 CCW)
1x 3.8v 450mah 30C/60C Lipo battery
1x USB Lipo/LIHV Charger

1x Propeller Disassemble Tool
1x Screwdriver

Standard Version
1x Snapper7 75mm FPV Drone
4x 40mm 3-Blade Propellers ( 4 CW & 4 CCW)
3x 3.8v 450mah 30C/60C Lipo Battery
1S06 6 Way Lipo/LIHV charger

1x Propeller Disassemble Tool
1x Screwdrive

Additional details

Related Products